| Category |
| Keyword |
|
Add to Cart
|
Click to Buy
|
Part Number
|
Part Description
|
Most Used
|
CSR
|
Tech Courier
|
RoHS
|
| 13037D Controller Parts |
|
Plate
|
|
|
|
|
691938-001
|
4-bay large form factor (LFF) non-hot-plug hard drive backplate assembly - Metal plate with 650mm (25.6 inch) mini-SAS to four SATA/SAS connectors cable assembly
|
|
B
|
-N/A-
|
COMPLY_2912
|
| Accessories |
|
Bezel
|
|
|
|
|
685042-001
|
5U security locking bezel assembly for tower servers - Covers the front of the server to protect from removing the hard drives or accessing the optical drive(s)
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
667273-001
|
Rack bezel - Front frame that surrounds the drive cages and front I/O assembly
|
|
A
|
-N/A-
|
COMPLY_5012
|
| Cabling Accessories/Tools |
|
Cable Kit
|
|
|
|
|
685051-001
|
Cable kit - Includes 711mm (28 inch) mini-SAS to mini-SAS cable, second processor power cable, hard drive backplane power cable, and 650mm (25.6 inch) mini-SAS to four SATA/SAS connectors
|
|
B
|
-N/A-
|
COMPLY_2912
|
| Cache Memory Module Parts |
|
Memory Module
|
|
|
|
|
633541-001
|
512MB Flash Backed Write Cache (FBWC) module - 184-pin, DDR3 Mini-DIMM - For use with B-Series Smart Array
|
|
B
|
-N/A-
|
COMPLY_1906
|
| Chassis Parts |
|
Cage
|
|
|
|
|
685046-001
|
Redundant Power Supply (RPS) cage - Mounts in the left rear of the chassis - For 'redundant enablement option' upgraded servers only
|
|
C
|
-N/A-
|
COMPLY_2912
|
|
Cover
|
|
|
|
|
667261-001
|
Hard drive cage cover - Covers one of the drive cages (8-bay SFF / 6-bay LFF) when no drives are installed
|
|
C
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
667276-001
|
Hard drive blank (Cover) - To fill empty Small Form Factor (SFF) drive bays - Gen8
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
667279-001
|
G8 Hard drive blank (cover) - To fill empty Large Form Factor (LFF) drive bays
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
Heat Sink
|
|
|
|
|
687456-001
|
Screw type processor heatsink assembly - Screws to the system I/O board assembly
|
|
B
|
-N/A-
|
COMPLY_5012
|
|
Holder
|
|
|
|
|
685047-001
|
Capacitor pack holder - Mounts on top of the redundant power supply cage (on v2 model servers or 'redundant enablement option' upgraded servers) or the bottom of the chassis (with ATX power supply)
|
|
A
|
-N/A-
|
COMPLY_2912
|
|
Panel
|
|
|
|
|
685050-001
|
Access Panel - Top cover (for rack mounted servers) or right side cover (for tower servers)
|
|
A
|
-N/A-
|
COMPLY_2912
|
| Chassis/Hardware |
|
Airflow Guide
|
|
|
|
|
685044-001
|
PCI fan baffle assembly - Translucent plastic piece that installs over the PCI card slots
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
685048-001
|
Airflow baffle assembly - Large translucent plastic baffle structure that mounts behind the fan cage and on top of the processor heat sink(s) and memory modules
|
|
A
|
-N/A-
|
COMPLY_2912
|
|
Bezel
|
|
|
|
|
685042-001
|
5U security locking bezel assembly for tower servers - Covers the front of the server to protect from removing the hard drives or accessing the optical drive(s)
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
667273-001
|
Rack bezel - Front frame that surrounds the drive cages and front I/O assembly
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
Cage
|
|
|
|
|
685046-001
|
Redundant Power Supply (RPS) cage - Mounts in the left rear of the chassis - For 'redundant enablement option' upgraded servers only
|
|
C
|
-N/A-
|
COMPLY_2912
|
|
Cover
|
|
|
|
|
667261-001
|
Hard drive cage cover - Covers one of the drive cages (8-bay SFF / 6-bay LFF) when no drives are installed
|
|
C
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
667276-001
|
Hard drive blank (Cover) - To fill empty Small Form Factor (SFF) drive bays - Gen8
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
667279-001
|
G8 Hard drive blank (cover) - To fill empty Large Form Factor (LFF) drive bays
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
Foot
|
|
|
|
|
667264-001
|
Tower feet - Snap-locks on to the bottom of the tower - Includes two feet
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
Heat Sink
|
|
|
|
|
687456-001
|
Screw type processor heatsink assembly - Screws to the system I/O board assembly
|
|
B
|
-N/A-
|
COMPLY_5012
|
|
Holder
|
|
|
|
|
685047-001
|
Capacitor pack holder - Mounts on top of the redundant power supply cage (on v2 model servers or 'redundant enablement option' upgraded servers) or the bottom of the chassis (with ATX power supply)
|
|
A
|
-N/A-
|
COMPLY_2912
|
|
Module
|
|
|
|
|
685049-001
|
Front I/O module assembly - Includes the four front USB connectors, power switch, status LEDs, and associated cables - Mounts on the front between the drive cages
|
|
B
|
-N/A-
|
COMPLY_2912
|
|
Panel
|
|
|
|
|
685050-001
|
Access Panel - Top cover (for rack mounted servers) or right side cover (for tower servers)
|
|
A
|
-N/A-
|
COMPLY_2912
|
| Controller Module Parts |
|
Capacitor
|
|
|
|
|
660093-001
|
Capacitor pack with 914mm (36 in) cable. For use with 512MB/1GB/2GB cache module - Provides back up power to the flash-based write cache (FBWC) memory module for up to 80 seconds in the event of a system power failure. For use with Smart Array controllers
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
Memory Module
|
|
|
|
|
633541-001
|
512MB Flash Backed Write Cache (FBWC) module - 184-pin, DDR3 Mini-DIMM - For use with B-Series Smart Array
|
|
B
|
-N/A-
|
COMPLY_1906
|
| DIMM Memory Module Parts |
|
Memory (DIMM)
|
|
|
|
|
664695-001
|
4GB, 1333MHz, PC3L-10600E-9, DDR3, dual-rank x8, 1.35V, unbuffered with ECC dual in-line memory module (UDIMM)
|
|
A
|
-N/A-
|
COMPLY_5012
|
| Drive Parts |
|
Drive
|
|
|
|
|
659571-001
|
500GB non-hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline
|
|
B
|
-N/A-
|
COMPLY_5012
|
| Drives |
|
Drive
|
|
|
|
|
659571-001
|
500GB non-hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline
|
|
B
|
-N/A-
|
COMPLY_5012
|
| Electronic Accessories |
|
Cable
|
|
|
|
|
465661-001
|
SATA cable - 1U, 61.0cm (24.0in) long
|
|
A
|
-N/A-
|
COMPLY_2106
|
|
|
|
|
682626-001
|
Mini-SAS cable, 560mm (22.0 inches) long - Connects between the hard drive backplane board and the integrated SAS controller on the system I/O board or PCI SAS controller board (for both the LFF and SFF hot-plug hard drive cages)
|
|
A
|
-N/A-
|
COMPLY_2106
|
|
|
|
|
686747-001
|
Mini-SAS to SATA cable assembly - One mini-SAS connector to four SATA connectors - The four SATA connectors mount on the rear of the large form factor (LFF) non-hot-plug drive cage plate
|
|
A
|
-N/A-
|
COMPLY_2012
|
|
Tool
|
|
|
|
|
413965-001
|
Torx tool - L-shaped wrench with T-15 and T-10 ends
|
|
A
|
-N/A-
|
COMPLY_1906
|
| Electronic Parts |
|
PC Board
|
|
|
|
|
667278-001
|
6-bay large form factor (LFF) hot-plug hard drive backplane board
|
|
C
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
685040-001
|
System I/O board (motherboard) - Includes subpan
|
|
B
|
-N/A-
|
COMPLY_2106
|
|
|
|
|
685045-001
|
Redundant Power System (RPS) backplane board and cable assembly - Mounts on the rear of the redundant power supply cage - For v2 model servers or 'redundant enablement option' upgraded servers only
|
|
C
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
801943-001
|
System I/O board (motherboard) Sandy Bridge includes tray
|
|
C
|
-N/A-
|
COMPLY_5012
|
|
Power Supply
|
|
|
|
|
511777-001
|
460 watt AC Common Slot (CS) Gold hot-plug power supply - Does not support Power Discovery Services (black plug) - 92% efficiency, 100-240VAC at 50/60Hz - Mixing of power supplies in the same server is not supported, must be the same spare part number
;
|
|
A
|
-N/A-
|
COMPLY_2706
|
| Electronics/Power Supply |
|
Battery
|
|
|
|
|
234556-001
|
Battery for real-time clock (RTC) - 3.0 V, 220 mAh, lithium coin cell, 20 mm diameter, 3.2 mm height (CR2032) ;
|
|
A
|
-N/A-
|
NONCOMPLIANT
|
|
Cable
|
|
|
|
|
465661-001
|
SATA cable - 1U, 61.0cm (24.0in) long
|
|
A
|
-N/A-
|
COMPLY_2106
|
|
|
|
|
682626-001
|
Mini-SAS cable, 560mm (22.0 inches) long - Connects between the hard drive backplane board and the integrated SAS controller on the system I/O board or PCI SAS controller board (for both the LFF and SFF hot-plug hard drive cages)
|
|
A
|
-N/A-
|
COMPLY_2106
|
|
|
|
|
686747-001
|
Mini-SAS to SATA cable assembly - One mini-SAS connector to four SATA connectors - The four SATA connectors mount on the rear of the large form factor (LFF) non-hot-plug drive cage plate
|
|
A
|
-N/A-
|
COMPLY_2012
|
|
Cable Kit
|
|
|
|
|
685051-001
|
Cable kit - Includes 711mm (28 inch) mini-SAS to mini-SAS cable, second processor power cable, hard drive backplane power cable, and 650mm (25.6 inch) mini-SAS to four SATA/SAS connectors
|
|
B
|
-N/A-
|
COMPLY_2912
|
|
Capacitor
|
|
|
|
|
660093-001
|
Capacitor pack with 914mm (36 in) cable. For use with 512MB/1GB/2GB cache module - Provides back up power to the flash-based write cache (FBWC) memory module for up to 80 seconds in the event of a system power failure. For use with Smart Array controllers
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
Fan
|
|
|
|
|
685043-001
|
Fan module assembly - 92mm x 92mm (3.62 inches x 3.62 inches) - Includes latch - Two used with a single processor, three are used with redundant fan configuration, and four are used with dual processors and in all v2 servers
|
|
B
|
-N/A-
|
COMPLY_2912
|
|
PC Board
|
|
|
|
|
667278-001
|
6-bay large form factor (LFF) hot-plug hard drive backplane board
|
|
C
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
685040-001
|
System I/O board (motherboard) - Includes subpan
|
|
B
|
-N/A-
|
COMPLY_2106
|
|
|
|
|
685045-001
|
Redundant Power System (RPS) backplane board and cable assembly - Mounts on the rear of the redundant power supply cage - For v2 model servers or 'redundant enablement option' upgraded servers only
|
|
C
|
-N/A-
|
COMPLY_5012
|
|
Plate
|
|
|
|
|
691938-001
|
4-bay large form factor (LFF) non-hot-plug hard drive backplate assembly - Metal plate with 650mm (25.6 inch) mini-SAS to four SATA/SAS connectors cable assembly
|
|
B
|
-N/A-
|
COMPLY_2912
|
|
Power Supply
|
|
|
|
|
511777-001
|
460 watt AC Common Slot (CS) Gold hot-plug power supply - Does not support Power Discovery Services (black plug) - 92% efficiency, 100-240VAC at 50/60Hz - Mixing of power supplies in the same server is not supported, must be the same spare part number
;
|
|
A
|
-N/A-
|
COMPLY_2706
|
| External Case Parts |
|
Foot
|
|
|
|
|
667264-001
|
Tower feet - Snap-locks on to the bottom of the tower - Includes two feet
|
|
A
|
-N/A-
|
COMPLY_5012
|
| Memory |
|
Memory (DIMM)
|
|
|
|
|
664695-001
|
4GB, 1333MHz, PC3L-10600E-9, DDR3, dual-rank x8, 1.35V, unbuffered with ECC dual in-line memory module (UDIMM)
|
|
A
|
-N/A-
|
COMPLY_5012
|
| Miscellaneous Parts |
|
Airflow Guide
|
|
|
|
|
685044-001
|
PCI fan baffle assembly - Translucent plastic piece that installs over the PCI card slots
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
|
|
|
685048-001
|
Airflow baffle assembly - Large translucent plastic baffle structure that mounts behind the fan cage and on top of the processor heat sink(s) and memory modules
|
|
A
|
-N/A-
|
COMPLY_2912
|
| Other Accessories |
|
Rack Mount Kit
|
|
|
|
|
685039-001
|
Rack bezel ear kit - Includes the left and right rack ears with release levers, the discovery service cable (for the left rack ear), two server base blank covers, and the SID module blank
|
|
A
|
-N/A-
|
COMPLY_2912
|
|
Rail Kit
|
|
|
|
|
667272-001
|
3U to 7U high rack mounting rail kit - Includes the left and right rails, and cable management arm
|
|
A
|
-N/A-
|
COMPLY_5012
|
|
Tool
|
|
|
|
|
413965-001
|
Torx tool - L-shaped wrench with T-15 and T-10 ends
|
|
A
|
-N/A-
|
COMPLY_1906
|
| Processors |
|
Processor
|
|
|
|
|
676947-001
|
Intel Xeon Six-Core processor E5-2420 - 1.9GHz (Sandy Bridge-EN, 15MB Level-3 cache, 95 watt thermal design power (TDP), FCLGA 1356 socket) - Includes alcohol pad and thermal compound
|
|
C
|
-N/A-
|
COMPLY_5012
|
| Rail Kit Parts |
|
Rail Kit
|
|
|
|
|
667272-001
|
3U to 7U high rack mounting rail kit - Includes the left and right rails, and cable management arm
|
|
A
|
-N/A-
|
COMPLY_5012
|
| Router Parts |
|
Module
|
|
|
|
|
685049-001
|
Front I/O module assembly - Includes the four front USB connectors, power switch, status LEDs, and associated cables - Mounts on the front between the drive cages
|
|
B
|
-N/A-
|
COMPLY_2912
|
| System Electronics Parts |
|
Fan
|
|
|
|
|
685043-001
|
Fan module assembly - 92mm x 92mm (3.62 inches x 3.62 inches) - Includes latch - Two used with a single processor, three are used with redundant fan configuration, and four are used with dual processors and in all v2 servers
|
|
B
|
-N/A-
|
COMPLY_2912
|